Product Description

Harmony offers the Mariner with symmetrical blades and a traditional design to create a great entry-level touring paddle. The blades' oversize power face allows you to power through current and chop to reach a favorite fishing hole or birding spot. The strong, lightweight aluminum TAP shaft maximizes your paddling power's transmission to the water, while its control surface makes for an easy and comfortable grip for your control hand. Drip rings prevent paddle splash from running down your sleeves or dripping into the kayak's cockpit. ... Read more

Features

• Shaft Material: Aluminum
• Blade Material: Fiberglass
• Blade Length: 18.5"
• Blade Width: 7.5"
• Weight: 2lb

Product Description

Increase your paddle grip with MR. Zogs multi-purpose paddle wax. Never Spoils ... Read more

Product Description

Same function as plastic stoppers except they're rubber. Slide on to oar shaft using soap and water, the fit is tight. Fits both Carlisle and Cataract oar shafts. Does not fit over an Molded Oar Sleeve. Dimensions: 1" thick Inner diameter: 1 5/8" Outer diameter: 2 1/8" ... Read more

Product Description

Don't loose your paddle during that unexpected wet exit. Hook-and-loop closures secure one end to your paddle and the other to your hand or deck rigging. 4' long, 3 mm shock cord with swivel. ... Read more

Features

• 3mm Shock Cord
• 4' Long
• Swivel Joint

Product Description

If you are not using oar rights, plastic stoppers will position and keep your oars where you want them to be. Use 1400 L, large stoppers with Molded Oar Sleeves. Come in pairs.Small Stopper: Mounts directly on small-diameter shafts1 3/8" - 1 5/8" Regular:Mounts directly on Carlisle or Cataract shafts1 3/4" - 2" Large: For larger-diameter shafts, Molded Oar Sleeves, or wraps2" - 2 1/4" ... Read more

Features

Product Description

Improve your performance and join the ranks of elite paddlers, with the Bending Branches aluminum crank bent shaft paddle. This is the most inexpensive bent shaft we carry, so if a small budget and sore wrists are factors, give the Infusion Crank a try. Blade is 6.75" x 18" Feathering: Adjustable to 0 and 60 left- or right- hand control, with foam grips. ... Read more

Features

• 18"L x 6.75"W 2 pc. Bent
• Asymmetrical
• Coated Aluminum
• Nylon/Fiberglass Injection-Molded Composite

Product Description

Protect your oar and tighten the open oarlock system with molded oar sleeves. Injection molded polyethylene. Fits all small oars 1 3/8" to 1 5/8" in diameter. We recommend the use of small oar rights or small plastic stoppers with the XS Molded Oar Sleeves. Will Fit Carlisle Bluewater & Economy Oars. ... Read more

Product Description

Strong, thick-walled shafts match up with powerful blades. The take-apart model breaks down easily for transport. With externally reinforced push-button joints, these paddles also lock securely in either right- or left-hand control positions. Take-apart paddles also break down into two raft/canoe paddles with the addition of 12" or 18" heavy-duty T-grip Adapter Handles (sold separately). This economical paddles' intended use is for inflatable and recreational kayaks. 8' is for an average size paddler. ... Read more

Features

• 2 pc. Straight
• 20.5"L x 7.5"W
• Aluminum encased with Polypropylene
• Polyethylene Blades
• Symmetrical

Product Description

Lightweight and responsive. Quality and performance at a great low price. Perfect for beginners, intermediates or anyone looking for a solid back-up paddle. Glass-filled 7" x 17.5" polypropylene blades for durability, fiberglass shaft for strength and flexibility. Blade feather can be set at 0 or 60, left- or right-hand control. Two-piece construction for easy storage. ... Read more

Features

• 17.5"L x 7"W 2 pc. Straight
• Asymmetrical
• Fiberglass
• Glass Filled Polypropylene

Product Description

Perfect for the beginner, this entry level model may be the last recreational paddle you need to buy. An excellent value, with many features usually found only on more expensive models. Blade is tough black nylon/fiberglass injection-molded composite. 6.5" x 18" blade. Two-piece aluminum shaft. ... Read more

Features

• 18"L x 6.75"W 2 pc. Straight
• Aluminum
• Asymmetrical
• Nylon/Fiberglass Injection-Molded Composite

Product Description

Deep convex and flexible rings stop water from traveling down your paddle shaft before it reaches your hands. Adjustable, one size fits all.Great for one piece paddles! ... Read more

Features

• Flexible material, easy to put on paddle shaft
• For paddle shafts with a 1" diameter or larger

Product Description

Same great design as the Standard take-apart but with a spoon blade that pulls water towards the center adding power to your stroke.This economical paddles' intended use is for inflatable and recreational kayaks. Average Weight: 3.5 lbs. (8 foot) Size Conversion 7'= 213cm 8'= 244cm 8' is for and average size paddler. ... Read more

Product Description

Keep your oar blades in the vertical position without compromising the feathering ability of open oarlocks. These oar rights fit snugly over the molded oar sleeves with an adjustable inside diameter from 2 - 2 1/4". For Carlisle and Cataract oars, mount the Large Oar-Right on top of the Molded Oar sleeve (as pictured) and don't forget a spare! Large: Fits 2" - 2 1/4" diameter oars (Carlisle & Cataraft Oars with Oar Sleeve) Small: Fits 1 3/8" - 1 5/8" diameter oars (Bluewater Oars and Economy Oars use XS Oar Sleeve) ... Read more

Features

• Large Adjust from 2" to 2 1/4" Inside Diameter

Product Description

The Skagit offers unbeatable value and performance to entrants and recreational kaykers. The Skagit is recognized for it's light swing weight, smooth and stable design, as well as, for offering all the benefits of a fiberglass shaft. Fiberglass reinforced nylon blades. Smooth And Stable stroke created from WernerÕs signature dihedral and asymmetrical design. Lightest swing weight offered at this price. Fiberglass shaft is smooth for a comfortable feel and is more durable than other types of shaft. Three ferrule adjustments Unfeathered, Left and Right at an easy to use 45 degrees. ... Read more

Features

• Injection Molded Nylon/Fiberglass Blades
• Fiberglass Shaft
• Light Swing Weight
• Smooth Linking Strokes
• 3-Position Breakdown Shaft

Product Description

Extra Pin for the Pin and Clip Setup. ... Read more

Features

• Heavy-duty Steel Pins - 9" or 12"

Product Description

Excellent performance and value! Efficient dihedral asymmetric blade shape allows zero torque, providing a smooth stroke and excellent control. 6.5" x 19" glass-filled nylon blades and fiberglass shaft. Two-piece shaft allows feathering of 0 or 60 Degrees. Right- or left-hand control. ... Read more

Features

• 19"L x 6.5"W Asymetrical
• Dihedral
• Fiberglass
• Glass-Filled Nylon

Product Description

The Werner Cascadia 2 Piece Paddle with nylon blades and straight fiberglass shaft is crafted for durability and comfort. Oval indexing on the Cascadia is similar to Werner's performance models. The fiberglass-reinforced blade keeps the paddle lightweight and durable.Get out on the water without busting up your piggy bank. Vendor ... Read more

Features

• Shaft Material: Fiberglass
• Blade Material: Nylon
• Blade Length: 49cm
• Blade Width: 15.6cm
• Weight: 34oz, 964g

Product Description

Tough and buoyant, these blades do the job whether you're fishing or whitewater rafting. Heavy-duty structural polyurethane surrounds a lightweight composite core. The 6 1/4" Original Cataract blade has an optional tip protector for extra durability. ... Read more

Features

• 6 1/4" Blade
• High-density Polyurethane
• Lightweight Composite Core

Product Description

The finest whitewater open oarlock available! Made of Superston, a proprietary manganese, and the strongest bronze alloy of its kind. Superston's composition assures unmatchable strength and remarkable corrosion resistance under severe conditions. The 5/8" diameter, 3-1/2" long shaft is precision-turned and drilled for a split ring. The horn opening is 1-5/8" with a 2-3/8" inside diameter. Oarlocks include Split Ring keepers. Sold individually or in pairs, so don't forget to order a spare. ... Read more

Features

• -\Proprietary Manganese and Bronze-alloy Construction -\3 1/2" long -\5/8" diameter -\Horn Opening: 1 5/8" -\Inside Diameter: 2 3/8"

Product Description

Carlisle Drip Rings for Take-apart paddles. Stops water from traveling down your paddle shaft before it reaches your hands. Not adjustable - Compatible with Carlisle take-apart and K1 paddles only. Color: Black ... Read more